Alamo TW84 Instrukcja Użytkownika Strona 1

©2007 Alamo Group Inc.TW84Published 03/07 Effective Serial No. TW84-17675 through Current Part NO. 00760962COPERATOR’S MANUAL RHINO® 1020 S. San

SAFETYTW84 03/07 Safety Section 1-4© 2007 Alamo Group Inc.SAFETYAlways read carefully and comply fully with the manufacturer’sinstructions when handl

OPERATIONTW84 03/07 Operation Section 4-8© 2007 Alamo Group Inc.OPERATION3.6 Front End WeightA minimum of 20% total tractor weight must be maintained

OPERATIONTW84 03/07 Operation Section 4-9© 2007 Alamo Group Inc.OPERATION4.1 Boarding the TractorUse both hands and equipped handrails and steps for

OPERATIONTW84 03/07 Operation Section 4-10© 2007 Alamo Group Inc.OPERATION5. STARTING THE TRACTORThe operator must have a complete understanding of t

OPERATIONTW84 03/07 Operation Section 4-11© 2007 Alamo Group Inc.OPERATION6.1 Connecting the Mower-Lift Type1. Make sure the tractor is equipped wit

OPERATIONTW84 03/07 Operation Section 4-12© 2007 Alamo Group Inc.OPERATION6.2 Connecting the Mower-Pull Type1. Make sure the tractor is equipped with

OPERATIONTW84 03/07 Operation Section 4-13© 2007 Alamo Group Inc.OPERATION7. If using a hydraulic cylinder, connect hydraulic hose ends into tractor

OPERATIONTW84 03/07 Operation Section 4-14© 2007 Alamo Group Inc.OPERATION5. Level the mower side to side by manipulatingone lower lift arm length.

OPERATIONTW84 03/07 Operation Section 4-15© 2007 Alamo Group Inc.OPERATION7.1 Setting Mowing Height-Pull Type1. Park the tractor and mower on level g

OPERATIONTW84 03/07 Operation Section 4-16© 2007 Alamo Group Inc.OPERATION8.1 Driveline Length CheckWhen fitting the mower to the tractor, the telesc

OPERATIONTW84 03/07 Operation Section 4-17© 2007 Alamo Group Inc.OPERATION“Bottoming Out” Check Procedure• Disconnect driveline from the tractor and

SAFETYTW84 03/07 Safety Section 1-5© 2007 Alamo Group Inc.SAFETYEquipment Operation Safety Instructions and PracticesDO NOT operate this Implement on

OPERATIONTW84 03/07 Operation Section 4-18© 2007 Alamo Group Inc.OPERATION9. PRE-OPERATION INSPECTION AND SERVICEBefore each use, a pre-operation ins

OPERATIONTW84 03/07 Operation Section 4-19© 2007 Alamo Group Inc.OPERATION9.1 Tractor Pre-Operation Inspection/ServiceRefer to the tractor operator’s

OPERATIONTW84 03/07 Operation Section 4-20© 2007 Alamo Group Inc.OPERATION• Perform scheduled lubrication as detailed in the maintenance section.• En

OPERATIONTW84 03/07 Operation Section 4-21© 2007 Alamo Group Inc.OPERATION• Lift Type-Ensure the tailwheel beam position support bolts are properly i

OPERATIONTW84 03/07 Operation Section 4-22© 2007 Alamo Group Inc.OPERATION• Inspect blades and blade bolts for looseness and excessive wear. Make su

OPERATIONTW84 03/07 Operation Section 4-23© 2007 Alamo Group Inc.OPERATIONInspect the Blades daily for abnormal wear. REPLACE BOTH BLADES on that car

OPERATIONTW84 03/07 Operation Section 4-24© 2007 Alamo Group Inc.OPERATIONRotary Mower PRE-OPERATION InspectionMower ID#________________ Make _______

OPERATIONTW84 03/07 Operation Section 4-25© 2007 Alamo Group Inc.OPERATIONTractor PRE-OPERATION InspectionMower ID#________________ Make ____________

OPERATIONTW84 03/07 Operation Section 4-26© 2007 Alamo Group Inc.OPERATION10. DRIVING THE TRACTOR AND IMPLEMENTSafe tractor transport requires the op

OPERATIONTW84 03/07 Operation Section 4-27© 2007 Alamo Group Inc.OPERATION10.1 Starting the TractorThe procedure to start the tractor is model specif

SAFETYTW84 03/07 Safety Section 1-6© 2007 Alamo Group Inc.SAFETYBe sure you have adequate knowledge of the property you will be working on. Take tim

OPERATIONTW84 03/07 Operation Section 4-28© 2007 Alamo Group Inc.OPERATION10.3 Raising the MowerUsing the tractor 3-point hitch control lever, raiset

OPERATIONTW84 03/07 Operation Section 4-29© 2007 Alamo Group Inc.OPERATION10.5 Crossing Ditches and Steep InclinesWhen crossing ditches with steep ba

OPERATIONTW84 03/07 Operation Section 4-30© 2007 Alamo Group Inc.OPERATIONInclines and ditches should be approached along aline which is at an angle

OPERATIONTW84 03/07 Operation Section 4-31© 2007 Alamo Group Inc.OPERATIONMany varied objects, such as wire, cable, rope, or chains, can become entan

OPERATIONTW84 03/07 Operation Section 4-32© 2007 Alamo Group Inc.OPERATIONRotary Mowers are capable under adverse conditions of throwingobjects for g

OPERATIONTW84 03/07 Operation Section 4-33© 2007 Alamo Group Inc.OPERATION11.4 PTO RPM and Ground SpeedGround speed for mowing will depend upon the h

OPERATIONTW84 03/07 Operation Section 4-34© 2007 Alamo Group Inc.OPERATIONDo not mow with two machines in the same area except with Cab tractors with

OPERATIONTW84 03/07 Operation Section 4-35© 2007 Alamo Group Inc.OPERATIONDo not let the Blades turn when the Mower Deck is raised for any reason,inc

OPERATIONTW84 03/07 Operation Section 4-36© 2007 Alamo Group Inc.OPERATION11.6 Shutting Down the ImplementTo shut down the implement, first bring the

OPERATIONTW84 03/07 Operation Section 4-37© 2007 Alamo Group Inc.OPERATIONAlways shut the Tractor completely down, place the transmission in park, an

SAFETYTW84 03/07 Safety Section 1-7© 2007 Alamo Group Inc.SAFETYStart tractor only when properly seated in the Tractor seat. Starting atractor in ge

OPERATIONTW84 03/07 Operation Section 4-38© 2007 Alamo Group Inc.OPERATION13. MOWER STORAGEProperly preparing and storing the mower at the end of the

OPERATIONTW84 03/07 Operation Section 4-39© 2007 Alamo Group Inc.OPERATIONBefore transporting the tractor and mower, idle thetractor engine, disengag

OPERATIONTW84 03/07 Operation Section 4-40© 2007 Alamo Group Inc.OPERATIONThe SMV (Slow-Moving Vehicle) emblem isuniversal symbol used to alert drive

OPERATIONTW84 03/07 Operation Section 4-41© 2007 Alamo Group Inc.OPERATIONReduce speed before turning or applying the brakes.Ensure that both brake p

OPERATIONTW84 03/07 Operation Section 4-42© 2007 Alamo Group Inc.OPERATION15. TROUBLESHOOTING GUIDEProblem Possible Cause RemedyCUTTER VIBRATES Blade

OPERATIONTW84 03/07 Operation Section 4-43© 2007 Alamo Group Inc.OPERATIONBlades locked back. Free blades.Blades riding up due to blade bolt Replace

OPERATIONTW84 03/07 Operation Section 4-44© 2007 Alamo Group Inc.OPERATIONBlades on upside down. Turn Blades right side up and tighten.CUTTER WINDROW

Maintenance Section 5-1© 2007 Alamo Group Inc.MAINTENANCE SECTION

MAINTENANCETW84 03/07 Maintenance Section 5-2© 2007 Alamo Group Inc.MAINTENANCEBefore operating your Rotary Cutter, make sure it is properly lubricate

MAINTENANCETW84 03/07 Maintenance Section 5-3© 2007 Alamo Group Inc.MAINTENANCEGEARBOXThe gearbox has been filled with lubricant to the test plug leve

SAFETYTW84 03/07 Safety Section 1-8© 2007 Alamo Group Inc.SAFETYMow only in conditions where you have clear visibility in daylight or with adequate a

MAINTENANCETW84 03/07 Maintenance Section 5-4© 2007 Alamo Group Inc.MAINTENANCEDRIVELINE LUBRICATIONGrease Fittings are located on the Cross Assembly

MAINTENANCETW84 03/07 Maintenance Section 5-5© 2007 Alamo Group Inc.MAINTENANCEWhen attaching PTO yoke to tractor PTO shaft, it is important that spri

MAINTENANCETW84 03/07 Maintenance Section 5-6© 2007 Alamo Group Inc.MAINTENANCEBLADE REMOVALTo remove blades for sharpening or replacement, remove the

MAINTENANCETW84 03/07 Maintenance Section 5-7© 2007 Alamo Group Inc.MAINTENANCESLIP CLUTCHA slip clutch is incorporated in the PTO driveline. It is d

MAINTENANCETW84 03/07 Maintenance Section 5-8© 2007 Alamo Group Inc.MAINTENANCEMOWER STORAGEYour rotary mower represents an investment from which you

RHINO LIMITED WARRANTY1. LIMITED WARRANTIES1.01. Servis-Rhino warrants for one year from the purchase date to the original non-commercial, governme

TO THE OWNER/OPERATOR/DEALERIn addition to the standard Limited Warranty shown on the facing page, Rhino also provides:1.) A FIVE-YEAR (60 months) LI

TW84-SOM-03/07 P/N 00760962CPrinted U.S.ATW84ROTARY CUTTER

SERVIS-RHINO®1020 S. Sangamon Ave.Gibson City, IL 60936-9907Please fold (do not tear), tape, and drop in any mailbox.PLEASE FILL OUT OWNER WARRANTY R

SAFETYTW84 03/07 Safety Section 1-9© 2007 Alamo Group Inc.SAFETYAvoid mowing in reverse direction when possible. Check to make sure there are noper

• I have informed the Purchaser of this product of Warranty terms, provisions, and procedures that are applicable, reviewed the contents of the Opera

• I have informed the Purchaser of this product of Warranty terms, provisions, and procedures that are applicable, reviewed the contents of the Opera

• I have informed the Purchaser of this product of Warranty terms, provisions, and procedures that are applicable, reviewed the contents of the Opera

SAFETYTW84 03/07 Safety Section 1-10© 2007 Alamo Group Inc.SAFETYRotary Mowers are capable under adverse conditions of throwingobjects for great dist

SAFETYTW84 03/07 Safety Section 1-11© 2007 Alamo Group Inc.SAFETYConnecting or Disconnecting Implement Safety Instructions and PracticesTransporting

SAFETYTW84 03/07 Safety Section 1-12© 2007 Alamo Group Inc.SAFETYAllow sufficient clearance for the Implement to swing outward while turning. Impleme

SAFETYTW84 03/07 Safety Section 1-13© 2007 Alamo Group Inc.SAFETYMaintenance and Service Safety Instructions and PracticesOnly tow the Implement behi

To the Owner/Operator/DealerAll implements with moving parts are potentially hazardous. There is no substitute for a cautious, safe-minded operator w

SAFETYTW84 03/07 Safety Section 1-14© 2007 Alamo Group Inc.SAFETYNever work under the Implement, the framework, or any liftedcomponent unless the Imp

SAFETYTW84 03/07 Safety Section 1-15© 2007 Alamo Group Inc.SAFETYStorage and Parking Safety Instructions and PracticesConcluding Safety Instructions

SAFETYTW84 03/07 Safety Section 1-16© 2007 Alamo Group Inc.SAFETYDecal LocationNOTE: Rhino supplies safety decals on this product topromote safe ope

SAFETYTW84 03/07 Safety Section 1-17© 2007 Alamo Group Inc.SAFETYITEM PART NO. QTY TYPE DESCRIPTION1. 00725746 1 PELIGRO Spanish Translation1a. 007

SAFETYTW84 03/07 Safety Section 1-18© 2007 Alamo Group Inc.SAFETYDecal DescriptionPeligro Translation, If you do not know how to readEnglish, please

SAFETYTW84 03/07 Safety Section 1-19© 2007 Alamo Group Inc.SAFETYWARNING! Maintain shields and deflectors ingood condition. Failure to do so may lea

SAFETYTW84 03/07 Safety Section 1-20© 2007 Alamo Group Inc.SAFETYFor safety and to guarantee optimum productreliability always use genuine RHINO repl

SAFETYTW84 03/07 Safety Section 1-21© 2007 Alamo Group Inc.SAFETYAttention! Do not operate until all slip clutches areproperly adjust and are not fro

SAFETYTW84 03/07 Safety Section 1-22© 2007 Alamo Group Inc.SAFETYLOGO NAMEP/N 99101Logo Product Name: RhinoP/N D302WARNING! DO NOT transport at speed

SAFETYTW84 03/07 Safety Section 1-23© 2007 Alamo Group Inc.SAFETYName Decal - TW8400760604WARNING! Never Exceed Maximum TowingSpeed 25 MPHP/N 145838

In order to reduce accidents and enhance the safe operation of mowers, Alamo Group Ag Division, incooperation with other industry manufacturers has de

SAFETYTW84 03/07 Safety Section 1-24© 2007 Alamo Group Inc.SAFETYFederal Laws and RegulationsThis section is intended to explain in broad terms the c

Alamo Group Ag. Division is willing to provideone (1) AEM Mower Safety Practices VideoPlease Send Me: VHS Format – AEM/FEMA Mower Operator Safety Vide

TABLE OF CONTENTSSAFETY SECTION ... 1-1General Safety Instructio

Boarding the Tractor ...

Safety Section 1-1© 2007 Alamo Group Inc.SAFETY SECTION

Introduction Section 2-1© 2007 Alamo Group Inc.INTRODUCTION SECTION

INTRODUCTIONTW84 03/07 Introduction Section 2-2© 2007 Alamo Group Inc.INTRODUCTIONThis Rotary Mower is designed with care and built with quality mater

INTRODUCTIONTW84 03/07 Introduction Section 2-3© 2007 Alamo Group Inc.INTRODUCTIONThese mowers are available in lift-type and pull-type. These rugged

INTRODUCTIONTW84 03/07 Introduction Section 2-4© 2007 Alamo Group Inc.INTRODUCTIONAttention Owner/OperatorBEFORE OPERATING THIS MACHINE:1. Carefully

Assembly Section 3-1© 2007 Alamo Group Inc.ASSEMBLY SECTION

SAFETYTW84 03/07 Safety Section 1-2© 2007 Alamo Group Inc.SAFETYGeneral Safety Instructions and PracticesA safe and careful operator is the best oper

ASSEMBLYTW84 03/07 Assembly Section 3-2© 2007 Alamo Group Inc.ASSEMBLYSTANDARD A-FRAME ASSEMBLY(Asm-R-0123)Attach right and left A-frame's (1) to

ASSEMBLYTW84 03/07 Assembly Section 3-3© 2007 Alamo Group Inc.ASSEMBLYOPTIONAL A-FRAME ASSEMBLY ( Asm-R-0124)1. Insert bushing (5) into lower end of e

ASSEMBLYTW84 03/07 Assembly Section 3-4© 2007 Alamo Group Inc.ASSEMBLYSINGLE TAIL WHEEL ASSEMBLY - LIFT TYPE Asm-R-0125.Insert bushing (2) in lug cen

ASSEMBLYTW84 03/07 Assembly Section 3-5© 2007 Alamo Group Inc.ASSEMBLYDUAL TAIL WHEEL ASSEMBLY - LIFT TYPE AsmP-R-0022.Attach the tailwheel beam (1) t

ASSEMBLYTW84 03/07 Assembly Section 3-6© 2007 Alamo Group Inc.ASSEMBLYPULL-TYPE The standard Pull-Type unit will be shipped from the factory in the fo

ASSEMBLYTW84 03/07 Assembly Section 3-7© 2007 Alamo Group Inc.ASSEMBLYHYDRAULIC OR MANUAL LIFTAttach the Spring Assembly (Asm-0038) to the lug on the

ASSEMBLYTW84 03/07 Assembly Section 3-8© 2007 Alamo Group Inc.ASSEMBLYFRONT AND REAR DEFLECTORS (Standard Equipment) AND CHAINGUARDS (OPTIONAL EQUIPME

ASSEMBLYTW84 03/07 Assembly Section 3-9© 2007 Alamo Group Inc.ASSEMBLYGuard (11) to Chain Guard Mounting Plates (1&2) with 1/2" x 1-1/4"

ASSEMBLYTW84 03/07 Assembly Section 3-10© 2007 Alamo Group Inc.ASSEMBLY

ASSEMBLYTW84 03/07 Assembly Section 3-11© 2007 Alamo Group Inc.ASSEMBLYDRIVELINE ATTACHMENT (Asm-R-0129)Before starting assembly, make certain that al

SAFETYTW84 03/07 Safety Section 1-3© 2007 Alamo Group Inc.SAFETYOperator Safety Instructions and PracticesEngine Exhaust, some of its constituents, a

ASSEMBLYTW84 03/07 Assembly Section 3-12© 2007 Alamo Group Inc.ASSEMBLYCHECK CHAINS (EXTRA EQUIPMENT) FOR LIFT MODELS (Asm-R-0131)Check Chains are ava

ASSEMBLYTW84 03/07 Assembly Section 3-13© 2007 Alamo Group Inc.ASSEMBLYJACKSHAFT BEARING SUPPORT ASSEMBLY (FIGURE -PULL TYPE)Attach the Jackshaft bear

Operation Section 4-1© 2007 Alamo Group Inc.OPERATION SECTION

OPERATIONTW84 03/07 Operation Section 4-2© 2007 Alamo Group Inc.OPERATIONRHINO TW84 MEDIUM-DUTY ROTARY MOWEROPERATION INSTRUCTIONSRhino TW84 rotary m

OPERATIONTW84 03/07 Operation Section 4-3© 2007 Alamo Group Inc.OPERATION1. Standard Equipment and SpecificationsTW84Horsepower Required 30 HP Min. (

OPERATIONTW84 03/07 Operation Section 4-4© 2007 Alamo Group Inc.OPERATION2. OPERATOR REQUIREMENTSSafe operation of the unit is the responsibility of

OPERATIONTW84 03/07 Operation Section 4-5© 2007 Alamo Group Inc.OPERATION3. TRACTOR REQUIREMENTSThe tractor used to operate the mower must have the p

OPERATIONTW84 03/07 Operation Section 4-6© 2007 Alamo Group Inc.OPERATION3.3 Tractor HorsepowerThe power required to operate a mower is determined by

OPERATIONTW84 03/07 Operation Section 4-7© 2007 Alamo Group Inc.OPERATIONThe optional Heavy-Duty CAT II-III Quick Hitchcan be mounted to tractor’s wi