Alamo TW84 Instrukcja Użytkownika Pobierz pdf (Strona 140)

MAINTENANCE

TW84 03/07 Maintenance Section 5-4

MAINTENANCE

DRIVELINE LUBRICATION

Grease Fittings are located on the Cross Assembly of each U-Joint and on the telescoping tubes. Grease the

U-Joint after each 8 hours of use. FIGURE Mnt-0024. Do not force grease through the Needle Cup

Assemblies. Grease the telescoping tubes after every 8 hours use. Some PTO-to-Hitch connections may

necessitate cutting a hole in the shields to be able to align the Grease Fitting holes for lubrication. Lubricate

the shield bearings every 16 hours. Mnt-0024.

Make certain that the Driveline Integral Shields are free to telescope and rotate around the

Driveline without binding.

1 2 ... 135 136 137 138 139 140 141 142 143 144 145 ... 153 154

Brak uwag

Alamo TW84 Instrukcja Użytkownika Strona 140