Alamo TW84 Instrukcja Użytkownika Pobierz pdf (Strona 82)

ASSEMBLY

TW84 03/07 Assembly Section 3-4

ASSEMBLY

SINGLE TAIL WHEEL ASSEMBLY - LIFT TYPE

Asm-R-0125.

Insert bushing (2) in lug centered behind gearbox. Attach the tailwheel beam (1) to the lug on the mower deck

using bolt (3) and locknut (4).

Attach the brackets (5 & 6) to the main deck using bolts (8), washer (9), & nuts (10). Note: Formed leg with

adjustment holes must point to rear and should be on each side of tail wheel beam.

Install bolts 11) & nuts (12) on top and bottom of tailwheel beam. Insert through pair of holes which will give

approximate desired cutting height. Tighten all bolts per Torque Chart.

1 2 ... 77 78 79 80 81 82 83 84 85 86 87 ... 153 154

Brak uwag

Alamo TW84 Instrukcja Użytkownika Strona 82